Copper and its alloys, used in sculpture and as architectural elements, develop a corrosion products layer (CPL) when exposed to the outdoor environment; this layer is an intrinsic part of the object and contributes to its aesthetic appearance. To protect metal artworks from corrosion and preserve the CPL, innovative and non-toxic protective treatments are being developed. Linear-chain carboxylic acids (HCn) have thus been studied for about twenty years as corrosion inhibitors. Previous studies have demonstrated the effectiveness of decanoic acid (HC10) applied by immersion to historic copper objects: hydrophobic copper carboxylate precipitates form on the surface of the CPC but are easily leached away when exposed to the outdoors. The penetration of the inhibitor into the CPC is therefore essential for effective long-term protection. It has recently been shown that a sol-gel formulation based on tetramethylorthosilicate (TMOS) and acetone, although toxic, allows HCn (7, 8, and 10) to penetrate the CPL.
This thesis aims to develop new, carboxylic acid-doped, low-toxicity formulations offering effective and sustainable protection for the metal/CPC system via the sol-gel method. Understanding the interactions between the treatment solutions and the substrate, both immediately after treatment and when exposed outdoors, is essential for studying corrosion inhibition mechanisms and optimizing protective treatments.
To this end, sol-gel formulations based on tetraethylorthosilicate (TEOS), ethanol, or isopropanol, doped with HC8 acid, were prepared. The influence of each compound on the sol’s miscibility and gel time (gt) was studied to identify formulations adapted for on-site application. The structural homogeneity of the gel and its ability to encapsulate and diffuse HC8 acid within the silica network were then evaluated by characterizing its porosity, morphology, and chemical composition (nitrogen adsorption, SEM-SE, ATG-MS). Based on these results, formulations suitable for on-site application (miscible sol, gt > 24 h) were selected and applied via dip-coating to historical corroded copper (~100 years old). The interactions between the CPL and the treatments were studied using SEM-EDS to observe the penetration of silicon into the CPL, and using µ-Raman spectroscopy to evaluate the reactivity of HC8 acid. The treated coupons were then exposed outdoors for 3 to 9 months and examined to monitor the evolution of reactivity and the stability of the doped gel within the CPL. Additionally, the protective effect of the treatments before and after outdoor exposure was studied by immersing the coupons in an aggressive corrosive solution (KBr).
Among all the results, the formulations with a higher concentration of HC8 acid (19%) have a slow reaction kinetics, which limits the hydrolysis of the sol. This latter therefore remains hydrophobic, which reduces its penetration into the CPL. Furthermore, HC8 acid reacts immediately during treatment and forms copper octanoates (CuC8) into the CPL and on its surface, altering the color and hydrophobicity of the coupons. These formulations provide immediate protection but have poor durability when used outdoors. In contrast, ethanol-based formulations with low HC8 acid content (3%) have a gel time suitable for application at a restoration site (gt2 days), which ensures a shorter hydrolysis kinetics, allowing the silica network to form in depth in the entire CPL. The corrosion inhibitor is contained in the CPL and reacts only when the substrate is exposed to the outdoors, making it more resistant to aggressive corrosive environments. In this case, the gel acts as a reservoir of corrosion inhibitor within the CPL and represents a promising solution for the long-term protection of heritage copper artefacts.
Types d’événements
Thèses ou HDR
NIMBE/LAPA
Lumen
Université Paris-Saclay, 8 avenue des Sciences
91190 – Gif-sur-Yvette
Université Paris-Saclay, 8 avenue des Sciences
91190 – Gif-sur-Yvette
November 30 2026
from 2:00 PM at 5:00 PM


