| | | | | | | webmail : intra-extra| Accès VPN| Accès IST| Contact | Français
Design of new titanium alloys with improved ductility induced by combined TRIP and TWIP effects
Frédéric Prima
Laboratoire de Physico-Chimie des surfaces, Groupe de Métallurgie Structurale (UMR 7045)
Wed, Nov. 14th 2012, 10:30
SRMP Bât 520 p.109, CEA-Saclay

Over the last few decades, the interest for titanium alloys has been continuously increasing for industrial applications, due to a promising combination of high strength, low density and good corrosion resistance. However, both a low ductility (typically <20%) and a lack of strain hardening still constitute a major drawback when compared to steels or Co-Cr based alloys, limiting their potential in advanced applications where combination of strength and large deformation is required. Consequently, there is a huge challenge in developing new titanium materials displaying improved combination of mechanical properties including high plastic deformation capacity.

In this work, results are presented on the design of a new family of titanium alloys with high ductility induced by combined transformation-induced plasticity (TRIP) and twinning-induced plasticity (TWIP) effects. Mechanical tests carried out on a binary and ternary β-metastable Ti based alloy designed by a formulation strategy based on the “d- electron alloy design” show a very high work hardening rate combinated with a high ductility of about 40%. In-situ synchrotron X-ray diffraction (SXRD) and transmission electron microscopy reveal a combined mechanical activation of intense mechanical twinning and both ω and α’’ phases stress induced precipitations.

Contact : Luc BARBIER

 

Séminaire SRMP - Informations pratiques

Entrée sur le site du CEA de Saclay pour les séminaires SRMP

Afin de pouvoir entrer sur le site du CEA de Saclay veuillez adresser les données personnelles suivantes par courriel à :
(secrétariat) un avis d’entrée vous sera alors délivré :

 

Nom :

Prénom :

Date et lieu de naissance :

Nationalité :

Nom de l'employeur :

 

Ces informations doivent être envoyées au mieux deux jours avant la date du séminaire.>

Lors de votre venue vous devez vous présenter avec une carte d'identité ou un passeport en cours de validité. L'entrée sur le site se fait par l'entrée principale ou porte Nord (suivre le lien ci-dessous), un badge vous y sera remis. Demandez à l'accueil le Bât.520, ils vous renseigneront.
Les séminaires se déroulent au Bât. 520, pièce 109 (1er étage).
En cas de problème vous pouvez contacter le secrétariat au : 01 69 08 51 67


Formalities for entering the CEA Saclay site for SRMP seminars

To enter in CEA Saclay you need to send the following personal data to   (secretariat):

Informations utiles/Practical informations - Contact:

Informations:  Access to the CEA Saclay

 

Contact:

 

Last Name :

First Name :

Place and date of birth :

Nationality :

Employer Name :

These informations must be preferably sent at least two days before the seminar date.

 

When you come you must have a valid ID card or passport with you.

The entrance in CEA Saclay is through the main entrance or north entrance (see link below), a pass will be delivered. Ask at the “accueil” the path for the building 520. SRMP seminars take place in room 109 (first floor).

Any questions/troubles do not hesitate to contact our secretariat: 33 (0)1 01 69 08 51 67.


 

#38 - Last update : 11/02/2013

 

Retour en haut